Ping Glide 4.0 Wedge Available in Store
Ping Glide 4.0 Wedge Available in Store
Couldn't load pickup availability
Precision-machined face and grooves and new textured surface increase spin and consistency, a larger elastomer insert helps soften the touch, and four distinct milling options maximize versatility on full and fine shots. The compact and refined profile offers a look that gives confidence.
 |
 |
|
8620 carbon steel body, CTP elastomer insert The multi-material construction combines 8620 carbon steel with a larger, softer elastomer insert to provide a soft, responsive feel. The additional volume of the insert allows for 36% more contact with the face. |
Milled Grooves & Face Blast
Combined with the precision-milled face and grooves, the new Emery face adds more texture to the contact surface, creating greater friction and greater interaction between the face and the ball for more spin and lower launch angle. |
 |
 |
|
Full Shots The grooves in the lower lofted wedges (46°, 50° and 52°) are milled with a 20° sidewall and .005” edge radius for optimal all-around performance. |
Around the Green The higher lofted versions (54°, 56°, 58° and 60°) are milled to a .004” edge radius with a 28° sidewall to provide more spin, especially around the greens. |
 |
 |
|
'E' Grind (Eye2) The profile of the PING Eye2 inspired the "E" milling, featuring the high-toe design popularized by Karsten Solheim's iconic wedge of the early '80s. Features a hosel and domed outsole design similar to the original Eye2. |
W Grind
|
 |
 |
|
Four Grind Options Four differentiated sole grinds (S, W, T, E) are designed to match your attack angle and typical turf conditions to improve your performance and versatility on full and partial shots. |
S Grind
|
 |
 |
|
Key Components The Lamkin Crossline 1150 grip is longer to promote versatility of shots. PING's lightweight Z-Z115 shaft has a lower balance point for increased clubhead feel. |
And Grind
|
 |
|
|
T Grind
|
|
Specifications
| CLUB | LOFT | LENGTH | BOUNCE | SW |
|---|---|---|---|---|
| 46°S | 46.0° | 35 1/2" | 12.0° | D2 |
| 50°S | 50.0° | 35 1/2" | 12.0° | D2 |
| 52°S | 52.0° | 35 1/2" | 12.0° | D2 |
| 54°S | 54.0° | 35 1/4" | 12.0° | Q3 |
| 54°W | 54.0° | 35 1/4" | 14.0° | Q3 |
| 54°E | 54.0° | 35 1/4" | 10.0° | Q3 |
| 56°S | 56.0° | 35 1/4" | 12.0° | Q3 |
| 56°W | 56.0° | 35 1/4" | 14.0° | Q3 |
| 56°E | 56.0° | 35 1/4" | 10.0° | Q3 |
| 58°S | 58.0° | 35" | 10.0° | Q4 |
| 58°T | 58.0° | 35" | 6.0° | Q4 |
| 58°W | 58.0° | 35" | 14.0° | Q4 |
| 58°E | 58.0° | 35" | 8.0° | Q4 |
| 60°S | 60.0° | 35" | 10.0° | Q4 |
| 60°T | 60.0° | 35" | 6.0° | Q4 |
| 60°W | 60.0° | 35" | 14.0° | Q4 |
| 60°E | 60.0° | 35" | 8.0° | Q4 |
NOTE
- These specifications may vary due to manufacturing tolerances
- Lie calculated based on black point and standard length.
- Standard swing weights shown are with PING Z-Z115 steel shafts.
- Swingweights for graphite clubs are 2 to 3 points lighter than listed depending on the flex of the shaft.
- Available swingweights depend on the shaft and grip combination you choose.
- Available in models for right-handed and left-handed players
