Ping Glide 4.0 Wedge Steel
Ping Glide 4.0 Wedge Steel
Precision-machined face and grooves and new textured surface increase spin and consistency, a larger elastomer insert helps soften the touch, and four distinct milling options maximize versatility on full and fine shots. The compact and refined profile offers a look that gives confidence.
8620 carbon steel body, CTP elastomer insert The multi-material construction combines 8620 carbon steel with a larger, softer elastomer insert to provide a soft, responsive feel. The additional volume of the insert allows for 36% more contact with the face. |
Compact shape The Glide 4.0 attracts attention with its rounded and compact design that benefits from the advancement of the front edge and the fluidity of the hosel. |
|
Full Shots The grooves in the lower lofted wedges (46°, 50° and 52°) are milled with a 20° sidewall and .005” edge radius for optimal all-around performance. |
Around the Green The higher lofted versions (54°, 56°, 58° and 60°) are milled to a .004” edge radius with a 28° sidewall to provide more spin, especially around the greens. |
'E' Grind (Eye2) The profile of the PING Eye2 inspired the "E" milling, featuring the high-toe design popularized by Karsten Solheim's iconic wedge of the early '80s. Features a hosel and domed outsole design similar to the original Eye2. |
Four Grind Options Four differentiated sole grinds (S, W, T, E) are designed to match your attack angle and typical turf conditions to improve your performance and versatility on full and partial shots. |
S Grind
|
W Grind
|
T Grind
|
And Grind
|
Key Components The Lamkin Crossline 1150 grip is longer to facilitate shot versatility. PING's lightweight Z-Z115 shaft has a lower balance point for increased clubhead feel. |
Specifications
CLUB | LOFT | LENGTH | LIE ANGLE | BOUNCE | SW |
---|---|---|---|---|---|
46°S | 46.0° | 35 1/2" | 64.0° | 12.0° | D2 |
50°S | 50.0° | 35 1/2" | 64.0° | 12.0° | D2 |
52°S | 52.0° | 35 1/2" | 64.0° | 12.0° | D2 |
54°S | 54.0° | 35 1/4" | 64.3° | 12.0° | Q3 |
54°W | 54.0° | 35 1/4" | 64.3° | 14.0° | Q3 |
54°E | 54.0° | 35 1/4" | 64.3° | 10.0° | Q3 |
56°S | 56.0° | 35 1/4" | 64.3° | 12.0° | Q3 |
56°W | 56.0° | 35 1/4" | 64.3° | 14.0° | Q3 |
56°E | 56.0° | 35 1/4" | 64.3° | 10.0° | Q3 |
58°S | 58.0° | 35" | 64.5° | 10.0° | Q4 |
58°T | 58.0° | 35" | 64.5° | 6.0° | Q4 |
58°W | 58.0° | 35" | 64.5° | 14.0° | Q4 |
58°E | 58.0° | 35" | 64.5° | 8.0° | Q4 |
60°S | 60.0° | 35" | 64.5° | 10.0° | Q4 |
60°T | 60.0° | 35" | 64.5° | 6.0° | Q4 |
60°W | 60.0° | 35" | 64.5° | 14.0° | Q4 |
60°E | 60.0° | 35" | 64.5° | 8.0° | Q4 |
NOTE
- These specifications may vary due to manufacturing tolerances
- Lie calculated based on black point and standard length.
- Standard swing weights shown are with PING Z-Z115 steel shafts.
- Swingweights for graphite clubs are 2 to 3 points lighter than listed depending on the flex of the shaft.
- Available swingweights depend on the shaft and grip combination you choose.
- Available in models for right-handed and left-handed players